This fluoride low range (0.00 to 2.00 mg/L (as F- )) photometer is ideal to measure fluoride concentrations in water.
Easy to use: This meter has a tutorial mode that will guide you step-by-step through the measurement process. It includes all steps required for sample preparation, the required reagents and quantities.
Measuring in wastewater or seawater? Samples will need distillation
Reagents required: HI93729-01 (100 measurements)
Hanna Instruments Fluoride Photometer
Range: 0.00 to 2.00 mg/L (as F- )
Resolution: 0.01 mg/L
Accuracy: ±0.03 mg/L ±3% of reading at 25 °C
Method: Adaptation of Standard Methods for the Examination of Water and Wastewater, 18th Edition, SPADNS Method
Measurement System
Light source: Light Emitting Diode
Bandpass filter: 575 nm
Bandpass filter bandwidth: 8 nm
Bandpass filter wavelength accuracy: ±1.0 nm
Light detector: Silicon photocell
Cuvette typ:e Round 24.6 mm diameter (22 mm inside)
Additional specifications
Auto logging: 50 readings
Display: 128 x 64 pixel B/W LCD with backlight
Auto-off: After 15 minutes of inactivity (30 minutes before a READ measurement)
Battery type: 1.5 V AA Alkaline (3 pcs.)
Battery life: > 800 measurements (without backlight)
Environment: 0 to 50 °C (32 to 122 °F); 0 to 100% RH, non-serviceable
Dimensions: 142.5 x 102.5 x 50.5 mm (5.6 x 4.0 x 2.0")
Weight: (with batteries) 380 g (13.4 oz.)
Case: ingress protection rating IP67, floating case
